修复你的物品 社区 商店

KYVOL CYBOVAC E20 Front Bumper Replacement

简介

The Kyvol Cybovac E20 contains a front bumper with sensors to prevent the vacuum from hitting walls or furniture. This bumper can become obstructed by debris, so try cleaning it before anything else. If the problem persists, use this guide to replace the broken front bumper.

你所需要的

  1. KYVOL CYBOVAC E20 Front Bumper Replacement, Front Bumper: 步骤 1 中的图像 1，1

    • Start with the vacuum on a flat surface.

    • The power button should be on the side closest to you.

    编辑

  3. KYVOL CYBOVAC E20 Front Bumper Replacement: 步骤 2 中的图像 1，2 KYVOL CYBOVAC E20 Front Bumper Replacement: 步骤 2 中的图像 2，2

    • Flip the vacuum over so the bottom is facing up.

    • The dust bin should be on the side furthest from you.

    • Remove the eight 1 mm screws holding the bumper in place using a Phillips #00 screwdriver.

    编辑

  4. KYVOL CYBOVAC E20 Front Bumper Replacement: 步骤 3 中的图像 1，2 KYVOL CYBOVAC E20 Front Bumper Replacement: 步骤 3 中的图像 2，2

    • Remove both sides of the bumper and replace with new ones.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 13

总计 220