Jura Impressa S Model right-side panel removal - iFixit 维修指南

你所需要的

步骤 1 Right side panel

Jura Impressa S Model right-side panel removal, Right side panel: 步骤 1 中的图像 1，3

Jura Impressa S Model right-side panel removal, Right side panel: 步骤 1 中的图像 2，3

Jura Impressa S Model right-side panel removal, Right side panel: 步骤 1 中的图像 3，3

Remove the two Torx T15 screws at the bottom of the side panel.
Remove the Torx T15 screw on the front bottom right.
Remove the Torx T15 on the right underside of the front access door. Flip the door open a few inches.

步骤 2

Jura Impressa S Model right-side panel removal: 步骤 2 中的图像 1，1

A metal plate rests loosely on the top of the side panel and holds the rotation sensor in place. Note the position of the plate. Simply lift the plate upwards.
When reassembling, make sure that the sheet metal is put back in exactly the same way.
First lift the side panel away a little at the bottom, then lift it out at the top.

结论

Work through the steps in reverse order to reassemble your device.

由衷感谢以下译者：

de en

100%

shingle

Annika Faelker

这些译者帮助我们修补全世界！您也想加入吗？
开始翻译 ›

作者

与1其他贡献者

VauWeh

于10/19/15注册

202,975 声望

创作了246篇指南

+ 41更多徽章

团队

Repair is War on Entropy Repair is War on Entropy 的会员

Community

25 名成员

创作了1,114篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 4

总计 210