Jura Capresso IMPRESSA J5 opening procedure

撰写者： VauWeh (和另外一个贡献者)

评论： 0
收藏 0
完成 2

Jura Capresso IMPRESSA J5 opening procedure

难度

中等

步骤

10

所需时间

建议一个时间??

简介

Follow this guide to open the casing of a Jura J5.

工具

配件

没有特定配件。

步骤 1 Jura Capresso IMPRESSA J5 opening procedure

Unplug the power cord!

Unplug the power cord!
Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

步骤 2

Flip open the lid of the bean compartment.

Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

Remove the bean compartment.

Flip open the lid of the bean compartment.
Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.
Remove the bean compartment.

步骤 3

The top cover is fastened with oval head screws. Unscrew them.

These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

在这个步骤中使用的工具：

iFixit Precision 4 mm Screwdriver Bit

The top cover is fastened with oval head screws. Unscrew them.
These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

步骤 4

Also remove the two oval head screws underneath the ground coffee compartment lid.

Also remove the two oval head screws underneath the ground coffee compartment lid.

步骤 5

Now you can pry up the top cover all around.

Now you can pry up the top cover all around.
Remove the top cover. This often requires a little force.
Use plastic tools to avoid scratching your device.

步骤 6

Turn the device with the back facing you.

Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

Turn the device with the back facing you.
Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.
Remove the Jura label.

步骤 7

Underneath the label you will find two Torx T15 screws. Remove them.

Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

Underneath the label you will find two Torx T15 screws. Remove them.
Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

步骤 8

Remove the Torx T15 screw on the side panel with the water tank.

Remove the Torx T15 screw on the side panel with the water tank.

步骤 9

Pull the right side panel slightly towards the back.

Remove the side panel.

Pull the right side panel slightly towards the back.
Remove the side panel.

步骤 10

Pull the left side panel slightly towards the back and remove it.

Pull the left side panel slightly towards the back and remove it.

结论

Follow the steps in reverse order to reassemble your device.

2等其他人完成本指南。

特别感谢这些译者︰

de en

100%

jana°

Annika Faelker

VauWeh

这些翻译人员帮助我们修复这个世界！想要作出贡献？
开始翻译 ›

作者

与1其他贡献者

VauWeh

于2015年10月19日注册

148,874 信誉积分

创作了201篇指南

+ 37更多徽章

0条评论

浏览统计数据:

过去的24小时： 2

过去的7天： 20

过去的30天： 83

总计 2,657