修复你的物品 社区 商店

JBL L26 Speaker Replacement

简介

This guide will show you the step by step process of replacing a speaker for a JBL L26 speaker system. The process won’t be too difficult, but be careful when removing parts such as the terminal connector because they are fragile. There are similar JBL speakers like the model L40 which follow the same steps.

你所需要的

  1. JBL L26 Speaker Replacement, Speaker: 步骤 1 中的图像 1，1

    • Remove the four 6.4 mm Phillips #2 screws from the front of the speaker.

    编辑

  2. JBL L26 Speaker Replacement: 步骤 2 中的图像 1，1

    • Pull the speaker out of the frame and lay it onto the side.

    编辑

  3. JBL L26 Speaker Replacement: 步骤 3 中的图像 1，1

    • Unlatch the green wire by pulling on the terminal connector and not the wire.

    编辑

  5. JBL L26 Speaker Replacement: 步骤 4 中的图像 1，2 JBL L26 Speaker Replacement: 步骤 4 中的图像 2，2

    • Use a small prying tool to pry the terminal connector off of the tap.

    • After you unlatched both edges, pull the black wire out.

    编辑

  6. JBL L26 Speaker Replacement: 步骤 5 中的图像 1，1

    • Get your replacement speaker and connect the green wire by pushing the terminal connector onto the tap.

    编辑

  7. JBL L26 Speaker Replacement: 步骤 6 中的图像 1，2 JBL L26 Speaker Replacement: 步骤 6 中的图像 2，2

    • Connect the black wire by attaching the terminal connector onto the tap.

    • Use a clamping tool to clip the edges toward the tap.

    • Be careful not to clamp too hard so you don't damage the tap.

    编辑

  8. JBL L26 Speaker Replacement: 步骤 7 中的图像 1，1

    • Place the new speaker onto the frame and screw the four 6.4 mm Phillips #2 screws back in.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Nathnael Dubale

于09/20/20注册

269 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

York University, Team S2-G45, Melo-Thaiss Fall 2020 York University, Team S2-G45, Melo-Thaiss Fall 2020 的会员

YORK-MELO-THAISS-F20S2G45

1 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 20

总计 1,033