跳转到主内容

JBL Flip 5 Speaker Replacement

你所需要的

  1. JBL Flip 5 Speaker Replacement, Outer Case: 步骤 1 中的图像 1,2 JBL Flip 5 Speaker Replacement, Outer Case: 步骤 1 中的图像 2,2
    • Insert the flat edge of the metal spudger underneath the corner of the outer case.

    • Use the spudger to pry open the plastic clips that secure the outer case.

  2. JBL Flip 5 Speaker Replacement: 步骤 2 中的图像 1,1
    • Once all the clips are released, you will be able to pull up that edge of the case.

  3. JBL Flip 5 Speaker Replacement: 步骤 3 中的图像 1,1
    • Once one side is released, complete the previous two steps with the other side.

    • This side contains the buttons, so be careful so as to not damage them while prying the case off.

  4. JBL Flip 5 Speaker Replacement: 步骤 4 中的图像 1,2 JBL Flip 5 Speaker Replacement: 步骤 4 中的图像 2,2
    • Once all the clips are removed, you can gently remove the outer case.

    • The case is now fully removed. Now a new case will be attached by putting the case into position and pushing on the clips to reattach them.

  5. JBL Flip 5 Speaker Replacement, Speaker: 步骤 5 中的图像 1,1
    • Begin by unscrewing the four 9.6 mm-long screws with the Philips #00 screwdriver.

  6. JBL Flip 5 Speaker Replacement: 步骤 6 中的图像 1,1
    • Once screws are fully out make sure to carefully pull out so the wires connected don't get damaged.

  7. JBL Flip 5 Speaker Replacement: 步骤 7 中的图像 1,1
    • Once you carefully lift up the speaker, gently disconnect the wire that connects the speaker to the motherboard.

  8. JBL Flip 5 Speaker Replacement: 步骤 8 中的图像 1,1
    • Once connection has been disconnected you can lift the speaker completely out.

结论

To reassemble your device, follow these instructions in reverse order.

Gaurang Karpe

于10/30/23注册

109 声望

撰写一个指南

团队

UMass Dartmouth, Team 3-5, Konn Fall 2023 UMass Dartmouth, Team 3-5, Konn Fall 2023 的会员

UMASSD-KONN-F23S3G5

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 26

过去 30 天: 115

总计 344