跳转到主内容

修复你的物品

维修的权力

商店

配件

没有特定配件。

  1. Remove plastic outer housing using hands or a standard spudger.
    • Remove plastic outer housing using hands or a standard spudger.

  2. Using your hands, carefully remove outer housing and frame to expose the internal workings of the speaker.
    • Using your hands, carefully remove outer housing and frame to expose the internal workings of the speaker.

  3. Remove the 8.9mm Phillips #00 screws on each corner of the driver to be replaced. There are four screws per driver. Be sure to set the screws somewhere safe to ensure they aren’t lost.
    • Remove the 8.9mm Phillips #00 screws on each corner of the driver to be replaced. There are four screws per driver. Be sure to set the screws somewhere safe to ensure they aren’t lost.

  4. Remove the 3-pin connector from motherboard.
    • Remove the 3-pin connector from motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

10等其他人完成本指南。

College Student

于2017年02月22日注册

2,858 信誉积分

创作了4篇指南

团队

USF Tampa, Team S1-G2, Leahy Spring 2017 USF Tampa, Team S1-G2, Leahy Spring 2017 的会员

USFT-LEAHY-S17S1G2

5 名成员

创作了13篇指南

where did you source the drivers from?

Rashid Saad Siddiqui - 回复

hi my flip 3 1 speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

manu - 回复

I too want to know where you can buy new drivers. Can't find them online so far...

Johannes - 回复

i need help getting the front speakers only where would i get them???

brian ortiz - 回复

Sir

my flip 3 Both speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

Anil Kumar Hembrom - 回复

添加评论

浏览统计数据:

过去的24小时: 9

过去的7天: 47

过去的30天: 186

总计 14,324