修复你的物品 社区 商店

JBL Everest Elite 300 Headphone Jack Replacement

简介

Headphones not connecting to the auxiliary? This may be caused by the headphone jack. Here's a guide to replace it. All you will need is a Phillips #00 screwdriver, a soldering iron, and an iFixit opening tool.

你所需要的

  1. JBL Everest Elite 300 Headphone Jack Replacement, Speaker: 步骤 1 中的图像 1，1

    • Remove the ear pad with an opening pick.

    编辑

  2. JBL Everest Elite 300 Headphone Jack Replacement: 步骤 2 中的图像 1，1

    • Reveal the speaker.

    编辑

  4. JBL Everest Elite 300 Headphone Jack Replacement: 步骤 3 中的图像 1，1

    • Remove the 4.5 mm screws using the Phillips #00 screwdriver.

    编辑

  5. JBL Everest Elite 300 Headphone Jack Replacement: 步骤 4 中的图像 1，1

    • Pull apart the bronze speaker away from the headphones carefully to reveal the wiring.

    • Desolder the motherboard speaker connection.

    编辑

  6. JBL Everest Elite 300 Headphone Jack Replacement, Headphone Jack: 步骤 5 中的图像 1，1

    • Unscrew the circuit board connected to the headphone jack.

    编辑

  7. JBL Everest Elite 300 Headphone Jack Replacement: 步骤 6 中的图像 1，1

    • Desolder the cables connecting the headphone jack board to the headphones.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 5

总计 51