跳转到主内容

简介

The passive radiators help the speaker improve its bass and are part of the cover that allows the speaker to be waterproof. Removing the passive radiator is one of the first steps in opening up the JBL Charge 3. You can uncover the insides of the speakers through the sides.

  1. Remove the two 8mm Phillips #1 screws from the tabs. NOTE: There may be only one screw. NOTE: There may be only one screw.
    • Remove the two 8mm Phillips #1 screws from the tabs.

    • NOTE: There may be only one screw.

  2. Insert  the plastic opening tools underneath both tabs. Insert  the plastic opening tools underneath both tabs.
    • Insert the plastic opening tools underneath both tabs.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Twist and pull open the passive radiator. The left radiator twists off counterclockwise; the right clockwise.
    • Twist and pull open the passive radiator. The left radiator twists off counterclockwise; the right clockwise.

  5. Repeat all previous steps for the other passive radiator. NOTE: only the right radiator needs to be removed for changing the battery.
    • Repeat all previous steps for the other passive radiator.

    • NOTE: only the right radiator needs to be removed for changing the battery.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Jack Ng

于2018年10月08日注册

400 信誉积分

创作了3篇指南

团队

Cal Poly, Team S13-G1, White Fall 2018 Cal Poly, Team S13-G1, White Fall 2018 的会员

CPSU-WHITE-F18S13G1

4 名成员

创作了14篇指南

i have a different model of the charge 3 it doesnt have screws but its hard to take out

Water Bass Tester (Water BT) - 回复

mine has screws and was also hard to pull with one hand

Carbon cookie -

添加评论

浏览统计数据:

过去的24小时: 6

过去的7天: 46

过去的30天: 245

总计 1,236