跳转到主内容

Ivation IVWPDC20Y Flash Bulb Replacement

你所需要的

  1. Ivation IVWPDC20Y Flash Bulb Replacement, Flash Bulb: 步骤 1 中的图像 1,1
    • With the H2.0 bit screwdriver, remove the two screws on the yellow waterproof cover

  2. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 2 中的图像 1,1
    • Apply a plastic opening tool to each of the corners and gently remove the casing

    • The front casing is held down by adhesive and may require additional work to remove

    • Apply just enough force to undo the inner latches to make sure not to damage the waterproof seal

  3. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 3 中的图像 1,1
    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

  4. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 4 中的图像 1,1
    • Remove the six screws from the edge of the clear inner casing with the PH00 screwdriver bit

    • These screws are very small and easy to strip so apply consistent pressure when removing them

  5. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 5 中的图像 1,1
    • Pry off back outer casing using the black spudger or the blue prying tools

  6. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 6 中的图像 1,1
    • Carefully remove the screen from the silver casing using a prying tool or the black spudger

    • There is adhesive in the center of the screen, be sure not to bend it when applying pressure

  7. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 7 中的图像 1,1
    • Gently push out the pins holding the orange tape down using the pointy end of the spudger

    • Screen and orange tape should slip out as a whole

  8. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 8 中的图像 1,1
    • Remove three screws holding the silver screen casing to the motherboard using the PH00 bit screwdriver

  9. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 9 中的图像 1,1
    • Remove three screws holding the motherboard into the casing using the PH00 bit screwdriver bit

  10. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 10 中的图像 1,1
    • Gently lift the corner of the motherboard out

    • Everything should come out as one component free of the casing

  11. Ivation IVWPDC20Y Flash Bulb Replacement: 步骤 11 中的图像 1,1
    • Remove the soldering on the three wires holding the flash bulb

    • The wires are different colors: red, white, and black

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Wendy Jones

于02/06/16注册

225 声望

创作了2篇指南

团队

USF Tampa, Team 6-6, Eyestone Spring 2016 USF Tampa, Team 6-6, Eyestone Spring 2016 的会员

USFT-EYESTONE-S16S6G6

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 242