跳转到主内容

简介

If your record/stop switch is not working follow this guide to replace it.

配件

没有特定配件。

  1. Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.
    • Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. Remove the blue securing the lens cover. Then simply pull off the lens cover itself. Remove the blue securing the lens cover. Then simply pull off the lens cover itself.
    • Remove the blue securing the lens cover. Then simply pull off the lens cover itself.

  3. Remove black aluminum casing as shown.
    • Remove black aluminum casing as shown.

  4. Using a #00 Phillips screwdriver, unscrew the screw securing the record/stop switch.
    • Using a #00 Phillips screwdriver, unscrew the screw securing the record/stop switch.

  5. Remove the record/stop switch. You are then able to replace the switch.
    • Remove the record/stop switch. You are then able to replace the switch.

    • Be careful to not misplace the power button and spring that will no longer be secured when the switch is removed.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Christopher Brandl

于2018年10月09日注册

673 信誉积分

创作了5篇指南

团队

UW Stout, Team S6-G2, Ogden Fall 2018 UW Stout, Team S6-G2, Ogden Fall 2018 的会员

UWSTOUT-OGDEN-F18S6G2

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 202