跳转到主内容

Ion Air Pro Body Cover Replacement

你所需要的

  1. Ion Air Pro Body Cover Replacement, Body Cover: 步骤 1 中的图像 1,1
    • Unscrew all six screws.

    • Make sure you put the screws in a good spot where you won't lose them because they are small.

  2. Ion Air Pro Body Cover Replacement: 步骤 2 中的图像 1,1
    • After you're done with unscrewing, take off the blue lid shown here.

  3. Ion Air Pro Body Cover Replacement: 步骤 3 中的图像 1,1
    • On the other side of the device, lift this black piece of cover that is underneath the cap, on the bottom side of the Ion Air Pro.

  4. Ion Air Pro Body Cover Replacement: 步骤 4 中的图像 1,1
    • After removing the black lid, unscrew all eight screws here.

    • Again, make sure you keep track of your screws and don't lose them.

  5. Ion Air Pro Body Cover Replacement: 步骤 5 中的图像 1,1
    • Remove two more screws, one on each side, inside this socket.

  6. Ion Air Pro Body Cover Replacement: 步骤 6 中的图像 1,1
    • Next, unscrew the two screws located here.

  7. Ion Air Pro Body Cover Replacement: 步骤 7 中的图像 1,1
    • Detach the bottom black piece off from the bottom side but do not disconnect it from the wires.

    • Everything inside is still connected with all the wires, so be careful not to pull too hard or else everything inside could fall out or get broken.

  8. Ion Air Pro Body Cover Replacement: 步骤 8 中的图像 1,1
    • Finally, you can remove the body cover off and replace it with a new one if you have to.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

UW Stout, Team S6-G2, Ogden Fall 2018 UW Stout, Team S6-G2, Ogden Fall 2018 的会员

UWSTOUT-OGDEN-F18S6G2

4 名成员

创作了5篇指南

4条评论

Hey Chris where can I buy a replacement body cover?

The thread of the screw socket on my ion air pro WiFi has worn out and it can no longer be screwed onto any mounts.

Sam s - 回复

I LOST THE LOSTTHE REAR COVER WHILE HUNTING. iS THERE A REPLACEMENT I CAN GET

mcbee1010 - 回复

i lost the rear cover cap while hunting. can i purchase a new one

mcbee1010 - 回复

Can you show a photo of the other side (compared to step 8) showing the mounting thread please?

Andrew Mawby - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 7

总计 622