跳转到主内容

简介

The anti-block shield prevents little bits of food from clogging up the pressure release valve. It must be removed and cleaned after every use. This guide will demonstrate how to remove the anti-block shield on the device.

配件

没有特定配件。

  1. Instant Pot Smart-60 Anti-Block Shield Replacement, Anti-Block Shield: 步骤 1 中的图像 1,2 Instant Pot Smart-60 Anti-Block Shield Replacement, Anti-Block Shield: 步骤 1 中的图像 2,2
    • Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

    • Turn the lid upside down to access the anti-block shield.

  2. Instant Pot Smart-60 Anti-Block Shield Replacement: 步骤 2 中的图像 1,2 Instant Pot Smart-60 Anti-Block Shield Replacement: 步骤 2 中的图像 2,2
    • Wedge the iFixit opening tool between the anti-block shield and the underside of the lid.

    • Push down on the opening tool until the anti-block shield pops out.

    • The anti-block shield is fit very securely over the vent. It may take some force for it to pop out, and the part may pop out with some speed.

结论

To reassemble your device, follow these instructions in reverse order.

Anya (Anna) Houk

于2018年01月24日注册

158 声望

撰写一个指南

团队

Cal Poly, Team S1-G4, Livingston Winter 2018 Cal Poly, Team S1-G4, Livingston Winter 2018 的会员

CPSU-LIVINGSTON-W18S1G4

4 名成员

创作了6篇指南

一条评论

Where she'll I patches 3 liter instapot cooker gasket

nandiniananth99 - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 34

总计 790