Inspiron 7359 2-in-1 Screen Replacement - iFixit 维修指南

简介

This guide will help you replace the touchscreen LCD. Be extermly careful while replacing the touchscreen LCD.

你所需要的

步骤 1 Disassembling the Inspiron 7359 2-in-1

Inspiron 7359 2-in-1 Screen Replacement, Disassembling the Inspiron 7359 2-in-1: 步骤 1 中的图像 1，1

Turn off device before starting.
Turn the laptop upside down with the logo facing the surface of the table.

步骤 2

Inspiron 7359 2-in-1 Screen Replacement: 步骤 2 中的图像 1，2

Inspiron 7359 2-in-1 Screen Replacement: 步骤 2 中的图像 2，2

Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

步骤 3

Inspiron 7359 2-in-1 Screen Replacement: 步骤 3 中的图像 1，1

Use a spudger to separate the back cover from the laptop.
Start from one corner and work your way around the edge of the cover.
Be careful not to bend or crack the back cover.

步骤 4

Inspiron 7359 2-in-1 Screen Replacement: 步骤 4 中的图像 1，1

All hardware components should be exposed.

步骤 5 Screen

Inspiron 7359 2-in-1 Screen Replacement, Screen: 步骤 5 中的图像 1，1

Using a spudger or opening pick, carefully pry in between the screen and the screen backing.
After opening the LCD Screen, slowly and carefully open the laptop so the front of the screen touches the keyboard.

步骤 6

Inspiron 7359 2-in-1 Screen Replacement: 步骤 6 中的图像 1，1

Slowly peel back the tape that is attached to the screen itself.
Once the tape is removed, gently disconnect the attached cables.

步骤 7

Inspiron 7359 2-in-1 Screen Replacement: 步骤 7 中的图像 1，1

Carefully disconnect the attached cable.
Once you remove the attached cable, gently lift up the LCD panel.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与3其他贡献者

Dominique

于08/26/19注册

251 声望

创作了2篇指南

+ 4更多徽章

团队

Gateway, Team S1-G3, Saknee Fall 2019 Gateway, Team S1-G3, Saknee Fall 2019 的会员

GCC-SAKNEE-F19S1G3

4 名成员

创作了6篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 11

总计 438