修复你的物品 社区 商店

Insignia Sport NS-4V17 Motherboard Replacement

简介

Can't identify the source of your problem and suspect that the motherboard has something to do with it? This guide will show you how to remove the motherboard. Buckle down because this is the longest guide.

你所需要的

  1. Insignia Sport NS-4V17 Motherboard Replacement, Battery: 步骤 1 中的图像 1，1

    • Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.

    编辑

  2. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 2 中的图像 1，2 Insignia Sport NS-4V17 Motherboard Replacement: 步骤 2 中的图像 2，2

    • Detach the back cover by carefully pulling up and out on the back plastic casing.

    • Do not pull apart the red wire connecting the battery to the device.

    编辑

  3. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 3 中的图像 1，1

    • Use the plastic opening tool to reach underneath the battery, opposite from the side with the red wire, and remove it from its plastic case.

    • Be careful to not tear the wires while opening the case.

    编辑

  4. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 4 中的图像 1，1

    • Reach under the white plastic wire connector using the plastic opening tool and disconnect it from the socket.

    • Do not disconnect wires from plastic connector.

    编辑

  6. Insignia Sport NS-4V17 Motherboard Replacement, Front Case Cover: 步骤 5 中的图像 1，2 Insignia Sport NS-4V17 Motherboard Replacement, Front Case Cover: 步骤 5 中的图像 2，2

    • Remove the four corner plastic covers on the back of the device using the plastic opening tool.

    编辑

  7. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 6 中的图像 1，1

    • Using a Philips #00 screwdriver remove all four 4.5mm corner screws located underneath the corner pads.

    编辑

  8. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 7 中的图像 1，3 Insignia Sport NS-4V17 Motherboard Replacement: 步骤 7 中的图像 2，3 Insignia Sport NS-4V17 Motherboard Replacement: 步骤 7 中的图像 3，3

    • Carefully wedge the plastic opening tool into either long side of the device.

    • Slowly move the plastic opening tool along the side of the device, separating the front and back case covers.

    • Repeat these steps on the other side of the device.

    编辑

  9. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 8 中的图像 1，1

    • Once the front cover is loose, use your fingers to remove the front case cover for a new installation.

    编辑

  10. Insignia Sport NS-4V17 Motherboard Replacement, Motherboard: 步骤 9 中的图像 1，1

    • Remove the white plastic ring from around the scroll wheel with your fingers.

    编辑

  11. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 10 中的图像 1，1

    • Hold the sides of the device firmly with one hand.

    • Push down on the black favorite switch with your other hand so that it is pushed into the case.

    编辑

  12. Insignia Sport NS-4V17 Motherboard Replacement: 步骤 11 中的图像 1，2 Insignia Sport NS-4V17 Motherboard Replacement: 步骤 11 中的图像 2，2

    • With the component pushed in, lift up the top of the motherboard from the case.

    • Pull the motherboard from the top so that the audio jack and usb input are removed from the case socket.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Wesley Ballar

于04/18/13注册

88 声望

创作了4篇指南

徽章: 9

+ 6更多徽章

团队

Cal Poly, Team 12-36, Amido Spring 2013 Cal Poly, Team 12-36, Amido Spring 2013 的会员

CPSU-AMIDO-S13S12G36

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 468