Insignia NS-CLOPP2 Antenna Replacement - iFixit 维修指南

你所需要的

步骤 1 Antenna

Insignia NS-CLOPP2 Antenna Replacement, Antenna: 步骤 1 中的图像 1，1

Follow steps on removing the motherboard as a prerequisite.
Gently move the motherboard back, revealing the thin black wire that is the antenna. The antenna wire is, on the outside, located on the lower, middle back. Follow the wire from the outside to the inside to make sure it's the correct one.

步骤 2

Insignia NS-CLOPP2 Antenna Replacement: 步骤 2 中的图像 1，1

Pull the wire up, making sure it's connected to the motherboard from the back side. To replace the wire, cut it completely from the motherboard.

步骤 3

Insignia NS-CLOPP2 Antenna Replacement: 步骤 3 中的图像 1，1

To re-attach the antenna cord to the motherboard, use a soldering tool to connect the wire to the same spot it was originally attached to.

步骤 4

Insignia NS-CLOPP2 Antenna Replacement: 步骤 4 中的图像 1，1

Make sure the wire is securely in place in the correct area of the clock, labeled "antenna" from the outside.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Dilini De Silva

于03/11/15注册

757 声望

创作了5篇指南

+ 6更多徽章

团队

Marist, Team 1-1, Laflen Spring 2015 Marist, Team 1-1, Laflen Spring 2015 的会员

MARS-LAFLEN-S15S1G1

2 名成员

创作了5篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 4

总计 114