修复你的物品 社区 商店

Insignia NS-CLIP02 Speaker replacement and troubleshooting

简介

This guide shows how to locate and repair broken connections to the speakers.

你所需要的

  1. Insignia NS-CLIP02 Speaker replacement and troubleshooting, Motherboard: 步骤 1 中的图像 1，1

    • Set the clock radio on the work space so the bottom of the device is showing.

    编辑

  2. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 2 中的图像 1，2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 2 中的图像 2，2

    • Use a metal spudger to peel back the adhesive sticker on the bottom of the clock.

    • You should see a single screw beneath the sticker.

    编辑

  3. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 3 中的图像 1，2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 3 中的图像 2，2

    • Using a plastic opening tool, peel off the adhesive gel stoppers.

    编辑

  4. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 4 中的图像 1，1

    • Use a Phillips screwdriver to remove the six 11 mm screws on the bottom of the device.

    编辑

  5. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 5 中的图像 1，1

    • Remove the bottom cover from the device to reveal the motherboard.

    编辑

  6. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 6 中的图像 1，1

    • Use a Phillips screwdriver to remove the 9.5 mm screw located near the center of the motherboard.

    编辑

  8. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 7 中的图像 1，1

    • Lift the motherboard away from the device.

    编辑

  9. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 8 中的图像 1，3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 8 中的图像 2，3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 8 中的图像 3，3

    • Disconnect the four cables connecting the motherboard to the device.

    编辑

  10. Insignia NS-CLIP02 Speaker replacement and troubleshooting, Speaker: 步骤 9 中的图像 1，1

    • Remove the three screws located along the center of the base.

    编辑

  11. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 10 中的图像 1，2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 10 中的图像 2，2

    • Remove the base from the display.

    编辑

  12. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 11 中的图像 1，3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 11 中的图像 2，3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 11 中的图像 3，3

    • Using a metal spudger, remove the plastic face plate from the display.

    编辑

  13. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 12 中的图像 1，1

    • With a phillips screwdriver, remove the six screws shown pictured to the left.

    编辑

  14. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 13 中的图像 1，2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 13 中的图像 2，2

    • Using the metal spudger, pry the speaker grilles from the display.

    编辑

  15. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 14 中的图像 1，1

    • Using the phillips screwdriver, remove the four screws pictured to the left.

    编辑

  16. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 15 中的图像 1，1

    • Separate the two pieces of the display as shown.

    编辑

  17. Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 16 中的图像 1，3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 16 中的图像 2，3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: 步骤 16 中的图像 3，3

    • You can see that there are several points where connections to the speaker are soldered.

    • If all connections are soldered then replacement may be necessary.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Aubrey

于02/24/15注册

214 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

USF Tampa, Team 9-3, Leahy Winter 2015 USF Tampa, Team 9-3, Leahy Winter 2015 的会员

USFT-LEAHY-W15S9G3

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 4

总计 166