修复你的物品 社区 商店

Insignia NS-CLIP02 Motherboard Replacement

简介

This guide will demonstrate how to replace the motherboard of an Insignia NS-CLIP02. If your Insignia NS-CLIP02 is not performing as it should and you have already tried all of the troubleshooting tips, the motherboard may need to be replaced. The motherboard is an essential part of any device, and it is what keeps the device working well and it allows each individual part of the device to interact with each other. However, only replace the motherboard of the Insignia NS-CLIP02 if the device truly is not working and you have gone through all of the troubleshooting guides. Make sure the device is powered off/not plugged in before you begin the motherboard replacement.

你所需要的

  1. Insignia NS-CLIP02 Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，1

    • Set the clock radio on the work space so the bottom of the device is showing.

    编辑

  2. Insignia NS-CLIP02 Motherboard Replacement: 步骤 2 中的图像 1，2 Insignia NS-CLIP02 Motherboard Replacement: 步骤 2 中的图像 2，2

    • Use a metal spudger to peel back the adhesive sticker on the bottom of the clock.

    • You should see a single screw beneath the sticker.

    编辑

  3. Insignia NS-CLIP02 Motherboard Replacement: 步骤 3 中的图像 1，2 Insignia NS-CLIP02 Motherboard Replacement: 步骤 3 中的图像 2，2

    • Using a plastic opening tool, peel off the adhesive gel stoppers.

    编辑

  5. Insignia NS-CLIP02 Motherboard Replacement: 步骤 4 中的图像 1，1

    • Use a Phillips screwdriver to remove the six 11 mm screws on the bottom of the device.

    编辑

  6. Insignia NS-CLIP02 Motherboard Replacement: 步骤 5 中的图像 1，1

    • Remove the bottom cover from the device to reveal the motherboard.

    编辑

  7. Insignia NS-CLIP02 Motherboard Replacement: 步骤 6 中的图像 1，1

    • Use a Phillips screwdriver to remove the 9.5 mm screw located near the center of the motherboard.

    编辑

  8. Insignia NS-CLIP02 Motherboard Replacement: 步骤 7 中的图像 1，1

    • Lift the motherboard away from the device.

    编辑

  9. Insignia NS-CLIP02 Motherboard Replacement: 步骤 8 中的图像 1，3 Insignia NS-CLIP02 Motherboard Replacement: 步骤 8 中的图像 2，3 Insignia NS-CLIP02 Motherboard Replacement: 步骤 8 中的图像 3，3

    • Disconnect the four cables connecting the motherboard to the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

Erik

于02/19/15注册

405 声望

创作了4篇指南

徽章: 5

+ 2更多徽章

团队

USF Tampa, Team 9-3, Leahy Winter 2015 USF Tampa, Team 9-3, Leahy Winter 2015 的会员

USFT-LEAHY-W15S9G3

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 147