修复你的物品 社区 商店

Insignia Flex 8 NS-15AT08 Cameras Replacement

你所需要的

  1. Insignia Flex 8 NS-15AT08 Cameras Replacement, Back Casing: 步骤 1 中的图像 1，2 Insignia Flex 8 NS-15AT08 Cameras Replacement, Back Casing: 步骤 1 中的图像 2，2

    • Insert a plastic opening tool into the seam between the back casing and the screen to separate the back casing from the tablet.

    • You may need to use a metal opening tool for extra prying power, but beware that it can scratch your device or damage the internal components if the tool is inserted too deep.

    • You will hear the tabs pop as you separate the back casing around the tablet.

    翻译

  2. Insignia Flex 8 NS-15AT08 Cameras Replacement: 步骤 2 中的图像 1，2 Insignia Flex 8 NS-15AT08 Cameras Replacement: 步骤 2 中的图像 2，2

    • Lift the back casing away from the rest of the device which should include the exposed circuit board and screen.

    • Set the casing aside.

    翻译

  4. Insignia Flex 8 NS-15AT08 Cameras Replacement, Cameras: 步骤 3 中的图像 1，1

    • Use a plastic opening tool to flip up the black strip that is holding the orange camera ribbon near the module on the circuit board labeled "front camera" in white print.

    • Repeat this action on the orange camera ribbon near the module on the circuit board labeled "back camera" in white print.

    翻译

  5. Insignia Flex 8 NS-15AT08 Cameras Replacement: 步骤 4 中的图像 1，2 Insignia Flex 8 NS-15AT08 Cameras Replacement: 步骤 4 中的图像 2，2
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Use tweezers to gently pull on both orange camera ribbons in the opposite direction in which they are connected until they disconnect from the modules on the circuit board.

    翻译

  6. Insignia Flex 8 NS-15AT08 Cameras Replacement: 步骤 5 中的图像 1，2 Insignia Flex 8 NS-15AT08 Cameras Replacement: 步骤 5 中的图像 2，2

    • Peel off the grey tape covering the ribbons, in order to separate the cameras and their respective ribbons from the rest of the device.

    • Do not use excessive force while removing the tape to prevent tears in the ribbons.

    翻译

  7. Insignia Flex 8 NS-15AT08 Cameras Replacement: 步骤 6 中的图像 1，1

    • Use a a plastic opening tool to pry out the back camera at the top of the circuit board.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Krystal Rhodes

于09/22/15注册

488 声望

创作了3篇指南

徽章: 12

+ 9更多徽章

团队

Baylor, Team 6-7, Williams Fall 2015 Baylor, Team 6-7, Williams Fall 2015 的会员

BU-WILLIAMS-F15S6G7

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 6

总计 198