修复你的物品 社区 商店

Insignia Flex 8 Battery Replacement

简介

Welcome to the Insignia Flex 8 repair guide. If your battery is not holding a charge, use this guide to fix it. This replacement is simple and only requires a prying tool and soldering gun.

你所需要的

  1. Insignia Flex 8 Battery Replacement, Battery: 步骤 1 中的图像 1，1

    • Make sure the power is off to avoid injury in the following steps.

    • Position the tablet so that the screen is face down.

    • The power button is located in the upper left hand corner.

    • Hold the power button for three seconds until the tablet powers down.

    编辑

  2. Insignia Flex 8 Battery Replacement: 步骤 2 中的图像 1，2 Insignia Flex 8 Battery Replacement: 步骤 2 中的图像 2，2

    • Remove the back casing by sliding a credit card or a similarly thin but firm object in between the casing and the screen.

    • Run this object around the perimeter of the tablet until there is separation between the casing and the screen.

    • Remove the back casing and set aside.

    编辑

  4. Insignia Flex 8 Battery Replacement: 步骤 3 中的图像 1，1

    • Peel back the tape from battery and case.

    编辑

  5. Insignia Flex 8 Battery Replacement: 步骤 4 中的图像 1，1

    • Slide the spudger beneath battery to pry away it away from the case. Work around the battery, prying up all edges to remove from glue.

    • Do not puncture or bend battery. This could cause battery to leak acid.

    编辑

  6. Insignia Flex 8 Battery Replacement: 步骤 5 中的图像 1，1

    • Desolder the black, yellow and red connections from circuit board. Desoldering Help

    • Keep the soldering tool away from other components on the circuit board.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与2其他贡献者

Tyler Tyrrell

于03/11/15注册

890 声望

创作了4篇指南

徽章: 17

+ 14更多徽章

团队

Colorado Springs, Team 5-5, Panko Spring 2015 Colorado Springs, Team 5-5, Panko Spring 2015 的会员

UCCS-PANKO-S15S5G5

3 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 9,089