Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement

简介

Rubber gaskets may wear out over time, preventing the lid from closing/opening properly. This guide will show you how to replace the rubber gasket.

步骤 1 Rubber Gasket

Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement, Rubber Gasket: 步骤 1 中的图像 1，1

Remove lid and place upside down on a flat surface.

翻译

步骤 2

Grab the edge of the clear rubber gasket and slowly peel it off the lid.
Continue peeling off the gasket until it is completely detached from the lid.

翻译

结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

团队

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S12G3

4 名成员

创作了5篇指南

3条评论

Am having trouble Turning the lid from Unlock to lock. The pin comes out in the back when I go to turn it from unlock to lock. Can you help me?

pclarkrob3 - 2020年9月8日回复

I bought the insignia pressure cooker at a garage sale but, the rubber gasket smells bad. I’ve cleaned the entire cooker but, that gasket stinks like no other

Chuck Smith - 2020年10月4日回复

I am having the same problem as the first comment by pclarkrob3 I am having trouble turning the lid from unlock to lock. These are really crappy instructions!!!! I have only used my pressure cooker twice so everything is still new.

Vivian Lang - 2020年10月28日回复

Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement

简介

步骤 1 Rubber Gasket

添加评论

步骤 2

添加评论

作者

Savannah Webb

团队

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 的会员

3条评论

添加评论

嵌入本指南

预览