Insignia 6-Quart Pressure Cooker Float Valve Replacement

简介

Float valves may wear out over time, preventing them from rising or falling correctly. This guide will demonstrate how to replace the float valve.

步骤 1 Float Valve

Insignia 6-Quart Pressure Cooker Float Valve Replacement, Float Valve: 步骤 1 中的图像 1，1

Remove the lid and place it upside-down on a flat surface.

翻译

步骤 2

Pinch the rubber gasket on the float valve and pull up.

翻译

步骤 3

Pull the rubber gasket off of the metal rod.
The valve will fall out of its hole onto the table. It can now be cleaned or replaced.
You may find it helpful to push up on the float valve from the other side of the lid while you remove the gasket.

翻译

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

团队

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S12G3

4 名成员

创作了5篇指南

2条评论

I received the replacement valve and pot. Now my insignia instapot won't hold pressure. It keeps seeping steam/spritz out of the float valve. I am ready to toss it in the trash. It worked bafore I replaced that stem. I should've kept it.

Carole Neider - 2024年2月29日回复

OK after much digging, I found the old valve and now it is pressurizing.

Carole Neider - 2024年2月29日回复

Insignia 6-Quart Pressure Cooker Float Valve Replacement

简介

步骤 1 Float Valve

添加评论

步骤 2

添加评论

步骤 3

添加评论

作者

Savannah Webb

团队

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 的会员

2条评论

添加评论

嵌入本指南

预览