跳转到主内容

简介

Circuit boards may require replacement after consistent use. This guide will show how to remove the circuit board.

配件

没有特定配件。

  1. Insignia 6-Quart Pressure Cooker Circuit Board Replacement, Circuit Board and Power Cord: 步骤 1 中的图像 1,1
    • Use a Phillips head #2 screwdriver to remove the 6mm screw.

  2. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 2 中的图像 1,1
    • Twist the light grey plastic until the holes align with the blockers.

    • Remove the light grey plastic cover.

  3. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 3 中的图像 1,1
    • Remove the power cord from the slot it is inserted in.

  4. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 4 中的图像 1,1
    • Use a Phillips head #2 screwdriver to remove the 22mm screw connected to the black wire.

  5. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 5 中的图像 1,1
    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the red wire.

  6. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 6 中的图像 1,1
    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the blue wire.

  7. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 7 中的图像 1,1
    • Pinch the small white component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

  8. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 8 中的图像 1,1
    • Pinch the red component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

  9. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 9 中的图像 1,1
    • Wiggle the wide white component until it is removed from the circuit board.

  10. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 10 中的图像 1,1
    • Use a J1 head screwdriver to remove the 8mm screws from both sides of the circuit board.

  11. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 11 中的图像 1,1
    • Use a Phillips head #2 screwdriver to remove both 15mm screws from either side of the circuit board, indicated in the picture.

  12. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 12 中的图像 1,1
    • Position the pressure cooker so that the circuit board is farther from you then the black, red, and blue wire connections.

    • To the right of the board, use a Phillips head #2 screwdriver to remove the 6mm screw.

  13. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 13 中的图像 1,1
    • Use a Phillips head #2 screwdriver to remove the 6mm screw behind and to the right of the circuit board tray.

  14. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 步骤 14 中的图像 1,1
    • Remove and replace the circuit board.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Savannah Webb

于2018年01月18日注册

651 声望分

创作了5篇指南

团队

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S12G3

4 名成员

创作了5篇指南

6条评论

Where do you purchase the circuit board

Douglas Koons - 回复

Hi, thanks for the guide. Where could I purchase the circuit board?

Anthea - 回复

Please, Where can I buy the electrical circuit?

Mohammed - 回复

why is my circuit board not fixed to the top like in the diagram

david stanley - 回复

where can I purchase the circuit board

de27@bellsouth.net - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 12

过去的30天: 62

总计 1,904