菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

India Mark III Chain Replacement

撰写者： Andrew Optimus Goldheart (和另外5个贡献者)
  • 评论： 0
  • 收藏 0

难度

中等

步骤

8

所需时间

建议一个时间??

节

1

标志

1

Prerequisite Only

仅作为前提条件

请注意，本指南只是其他指南的前提条件。

简介

Prereq only.

工具

配件

没有特定配件。

  1. Place the spacer collar around the pump rod below the raised chain, with the beveled side down, and the flat side facing up. Place the spacer collar around the pump rod below the raised chain, with the beveled side down, and the flat side facing up. Place the spacer collar around the pump rod below the raised chain, with the beveled side down, and the flat side facing up.

    • Place the spacer collar around the pump rod below the raised chain, with the beveled side down, and the flat side facing up.

    翻译

  2. The following procedure requires two people. If you attempt to do this alone, you risk injuring yourself and damaging the pump. Lift the pump handle until the base of the chain comes to rest on the spacer collar, and the chain is slack. Hold the handle in this position while the chain is being detached. Lift the pump handle until the base of the chain comes to rest on the spacer collar, and the chain is slack. Hold the handle in this position while the chain is being detached.

    • The following procedure requires two people. If you attempt to do this alone, you risk injuring yourself and damaging the pump.

    • Lift the pump handle until the base of the chain comes to rest on the spacer collar, and the chain is slack. Hold the handle in this position while the chain is being detached.

    翻译

  3. Using the two access holes, place an angled socket wrench on the bolt and nut attaching the chain to the pump handle. Using the two access holes, place an angled socket wrench on the bolt and nut attaching the chain to the pump handle. Using the two access holes, place an angled socket wrench on the bolt and nut attaching the chain to the pump handle.

    • Using the two access holes, place an angled socket wrench on the bolt and nut attaching the chain to the pump handle.

    翻译

  5. Hold the wrench on the bolt stationary. Loosen the nut. Loosen the nut.

    • Hold the wrench on the bolt stationary.

    • Loosen the nut.

    翻译

  6. Remove the nut from the chain bolt. Remove the nut from the chain bolt. Remove the nut from the chain bolt.

    • Remove the nut from the chain bolt.

    翻译

  7. Remove the washer from the chain bolt. Remove the washer from the chain bolt.

    • Remove the washer from the chain bolt.

    翻译

  8. Remove the chain bolt. Remove the chain bolt.

    • Remove the chain bolt.

    翻译

  9. Pull the top of the chain straight off of the pump handle. Pull the top of the chain straight off of the pump handle. Pull the top of the chain straight off of the pump handle.

    • Pull the top of the chain straight off of the pump handle.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Andrew Optimus Goldheart

于2009年10月17日注册

423,420 信誉积分

创作了411篇指南

徽章: 43

+ 40更多徽章

团队

iFixit iFixit 的会员

Community

101 名成员

创作了9,072篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 0

总计 25