跳转到主内容

你所需要的

  1. In-Ear Headphone Control and Mic Block Disassembly, The Control Unit: 步骤 1 中的图像 1,1
    • Find the edge of the control unit and get a very fine flathead screw driver (or a plastic pry tool which would do less damage)

  2. In-Ear Headphone Control and Mic Block Disassembly, Opening The Unit: 步骤 2 中的图像 1,1
    • Wedge the tool in the corner and start sliding it to the left.

    • As you do this slowely twist the screw driver back and forth to release the clips.

    • Try not to let the tool slip into the control unit as this may damage the circuit board inside.

  3. In-Ear Headphone Control and Mic Block Disassembly, Removing The Cover: 步骤 3 中的图像 1,2 In-Ear Headphone Control and Mic Block Disassembly, Removing The Cover: 步骤 3 中的图像 2,2
    • Repeat step 2 and the control unit should open as seen in the image.

    • Remove the plastic sleeves and you will be left with just the circuit board (see second image).

  4. In-Ear Headphone Control and Mic Block Disassembly, Identify Broken Wire: 步骤 4 中的图像 1,1
    • It is quickly seen that one of the wires has broken away from the circuit board (see image)

  5. In-Ear Headphone Control and Mic Block Disassembly, Resolder the Broken Wire: 步骤 5 中的图像 1,1
    • Once the wire is found a steady hand and a fine tipped soldering iron should be used to reattach the wire.

    • Ensure that you do not head to circuit board for too long as it may cause damage (be as quick as possible!)

    • After this, the circuit board and wires should be replaced as they were before. Press the plastic cover halves together and it should click back into place.

    • And they are fixed!

结论

Your headphones should now be working!

3等其他人完成本指南。

Alexander

于2018年09月10日注册

233 声望

撰写一个指南

一条评论

Thanks a lot this worked perfectly thank you very much

MD Ratul - 回复

添加评论

浏览统计数据:

过去 24 小时: 15

过去 7 天: 133

过去 30 天: 587

总计 9,577