配件

无需配件。

  1. Flip the device over so the bottom is facing up.
    • Flip the device over so the bottom is facing up.

    • You will know it is the bottom because there will be six silver screws visible.

    添加评论

  2. Remove the USB converter device by gently pulling it out.
    • Remove the USB converter device by gently pulling it out.

    • Do not pull the converter device out by the cord.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the six silver screws using a small Phillips head screwdriver.

    添加评论

    • Slide the bottom plastic panel of the shell down so it is free of the end cap and the top panel.

    • Lift panel free of device.

    添加评论

    • Remove the plastic end cap by sliding it forward, freeing from the rest of the device.

    • You can identify the end cap by noting the label "SuperDisk Drive" above where you would insert a floppy disk.

    添加评论

    • Slide the metal housing out of the plastic shell.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Caitlin Horwatt

于2014年02月11日注册

137 信誉积分

创作了2篇指南

团队

Ohio State, Team 1-2, Buehl Spring 2014 Ohio State, Team 1-2, Buehl Spring 2014 的会员

OSU-BUEHL-S14S1G2

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 4

总计 466