修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

IBM Thinkpad T60 Palm Rest Replacement

简介

Always power down the computer before attempting any installation/removal of any hardware components. Be sure to remove the AC adapter and all cables from the computer. If the computer has been on, wait several minutes before beginning the procedure to ensure all parts have cooled down.

你所需要的

  1. IBM Thinkpad T60 Palm Rest Replacement, Battery: 步骤 1 中的图像 1，1

    • Turn the computer over to see the small tab on the battery located near the top of the Thinkpad.

    • Use your finger to slide the tab to the right to unlock the battery.

    翻译

  2. IBM Thinkpad T60 Palm Rest Replacement: 步骤 2 中的图像 1，2 IBM Thinkpad T60 Palm Rest Replacement: 步骤 2 中的图像 2，2

    • Once the tab is in the unlocked position (far right), pull the battery outwards away from the Thinkpad.

    • The battery is now disconnected.

    翻译

  4. IBM Thinkpad T60 Palm Rest Replacement, Palm Rest: 步骤 3 中的图像 1，2 IBM Thinkpad T60 Palm Rest Replacement, Palm Rest: 步骤 3 中的图像 2，2

    • Using a #0 Phillips screwdriver, remove the four 17.0 mm screws.

    翻译

    The screws we need to remove all supposedly share the same pictogram imprinted on the bottom case. If this is true why have you circled the rightmost screw in the photo above? The forth pictogram is near the screw below and to the left of the circled screw?

    airshack - 回复

  5. IBM Thinkpad T60 Palm Rest Replacement: 步骤 4 中的图像 1，1

    • Turn the computer back over, so the keyboard is facing upwards.

    • Open the display to access the palm rest. Apply pressure to the sides of the palm rest so that it bends upwards in the middle. Gently lift away from the computer.

    翻译

  6. IBM Thinkpad T60 Palm Rest Replacement: 步骤 5 中的图像 1，2 IBM Thinkpad T60 Palm Rest Replacement: 步骤 5 中的图像 2，2

    • Slightly lift the palm rest away from the computer.

    • The touchpad's data cable connects the palm rest to the base unit. BE CAREUL!

    • Detach the connector by pulling upwards on the white tab.

    翻译

    Putting it back on should be covered too, as it’s really hard to get everything lined up. Would be nice for some tips on that. Took me and other experienced guy 45 minutes to get the thing back on, and have all the screws seat!

    Glenn - 回复

    Where in this guide does it say how much RAM is supported? Am I missing something? Looks like two slots?

    airshack - 回复

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与11其他贡献者

Dylan Kratochvil

于01/30/13注册

591 声望

创作了3篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 7-9, Maness Winter 2013 Cal Poly, Team 7-9, Maness Winter 2013 的会员

CPSU-MANESS-W13S7G9

4 名成员

创作了16篇指南

一条评论

Needs a tutorial on how to install it. I can’t get the palmrest on correctly, I can still lift up on the palmrest and the laptop doesn’t latch properly.

Kyle Gilchrist - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 9

总计 2,192