简介

Removal of the Wi-Fi Card.

配件

无需配件。

Unscrew the 20 Phillips screws on the underside of the T42.
  • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

添加评论

Unscrew the 2 Phillips screws on both sides of the T42's rear.
  • Unscrew the 2 Phillips screws on both sides of the T42's rear.

leave these four screws alone. No need to remove them.

fredwb - 回复

Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

wbcam -

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - 回复

  • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

添加评论

  • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

添加评论

  • To remove Wi-Fi card, first disconnect both display wires on the top right.

添加评论

  • Then slide both of the metal pieces holding it down outwards, and it will pop up.

添加评论

  • Carefully pull it out.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Kevin Rehm

于2010年04月19日注册

376 信誉积分

创作了8篇指南

团队

Cal Poly, Team 29-76, Johann Spring 2010 Cal Poly, Team 29-76, Johann Spring 2010 的会员

CPSU-JOHANN-S10S29G76

4 名成员

创作了30篇指南

Get the HMM for the laptop! On a few of these, I have had to just pull out the internal wi-fi card, and use a USB wi-fi adapter.

Martin Campbell - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 7

过去的30天: 24

总计 12,145