跳转到主内容

Huawei Mediapad t1 7.0" Touchscreen Replacement

  1. Huawei Mediapad t1 7.0" Touchscreen  Replacement, Touch Screen: 步骤 1 中的图像 1,1
    • Open the SD slot and remove the screw hidden under the sticker.

  2. Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 2 中的图像 1,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 2 中的图像 2,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 2 中的图像 3,3
    • Use an opening pick to disengage the clips securing the back cover.

  3. Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 3 中的图像 1,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 3 中的图像 2,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 3 中的图像 3,3
    • Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables.

    • Disconnect the touchscreen connector.

    • Disconnect the display connector.

  4. Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 4 中的图像 1,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 4 中的图像 2,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 4 中的图像 3,3
    • Remove the 6 screws that secure the 2 metal stripes holding the display.

    • Remove the display.

  5. Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 5 中的图像 1,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 5 中的图像 2,3 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 5 中的图像 3,3
    • Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.

  6. Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 6 中的图像 1,2 Huawei Mediapad t1 7.0" Touchscreen  Replacement: 步骤 6 中的图像 2,2
    • Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.

结论

To assemble the device, follow these instructions in reverse order.

21等其他人完成本指南。

由衷感谢以下译者:

it en

100%

这些译者帮助我们修补全世界! 您也想加入吗?
开始翻译 ›

Smilzo

于11/09/13注册

11,240 声望

创作了39篇指南

4条评论

Not very clear unlike other guides I have followed….

Tracey Homeward - 回复

Ottimo video,

ti chiedo un consiglio, stavo cambiando il display al mio Huawei T1 A21 quando il connettore sul circuito stampato che collega il touch-screen si è danneggiato.

E’ un connettore particolare 25 pin + 28 e non riesco a trovarlo, sai dirmi come reperirlo?

grazie

Antonio

Antonio Durighello - 回复

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - 回复

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 8

过去 30 天: 32

总计 19,556