修复你的物品 社区 商店

Huawei MediaPad M3 Display Assembly Replacement

简介

This guide is about how to replace the Display assembly of Huawei MediaPad M3. Removing the display is a prerequisite of removing or displacing many other parts such as the front camera, the motherboard, and the rear camera. It is an 8.40 inch touchscreen with a resolution of 2560*1600 pixels at a pixel density of 359 pixels per inch. The display itself is thin and fragile; therefore all steps should be followed carefully.

你所需要的

  1. Huawei MediaPad M3 Display Assembly Replacement, Display Assembly: 步骤 1 中的图像 1，2 Huawei MediaPad M3 Display Assembly Replacement, Display Assembly: 步骤 1 中的图像 2，2

    • Use a heat gun to heat the display. It may take up to 30 seconds.

    • Slide in the opening picks to the four corners of the tablet and peel off the display carefully.

    编辑

  2. Huawei MediaPad M3 Display Assembly Replacement: 步骤 2 中的图像 1，2 Huawei MediaPad M3 Display Assembly Replacement: 步骤 2 中的图像 2，2

    • Open the display carefully.

    • Use a Phillips #00 screwdriver to remove the two 3.0mm screws.

    编辑

  4. Huawei MediaPad M3 Display Assembly Replacement: 步骤 3 中的图像 1，2 Huawei MediaPad M3 Display Assembly Replacement: 步骤 3 中的图像 2，2

    • After removing the two screws, use your hand to take out the silver metal bracket.

    编辑

  5. Huawei MediaPad M3 Display Assembly Replacement: 步骤 4 中的图像 1，3 Huawei MediaPad M3 Display Assembly Replacement: 步骤 4 中的图像 2，3 Huawei MediaPad M3 Display Assembly Replacement: 步骤 4 中的图像 3，3

    • Use the plastic opening tool to disconnect the two ribbon cable connectors.

    编辑

  6. Huawei MediaPad M3 Display Assembly Replacement: 步骤 5 中的图像 1，2 Huawei MediaPad M3 Display Assembly Replacement: 步骤 5 中的图像 2，2

    • Remove the display assembly from the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 31

总计 2,354