How to tighten the Razor A handlebar clamp

简介

If your steering column suddenly collapses into itself, this guide is for you. This guide will show you how to tighten the T-tube column to prevent that from happening.

步骤 1 How to tighten the Razor A handlebar clamp

How to tighten the Razor A handlebar clamp, How to tighten the Razor A handlebar clamp: 步骤 1 中的图像 1，1

Locate the T-tube clamp. It is in the middle of the steering column.

编辑

步骤 2

Open the clamp by pulling the lever away from the scooter.

编辑

步骤 3

Locate the screw on the side of clamp.
Turn the screw on the side of the clamp by hand in a clockwise direction.
Attempt to close the clamp. If the lever is too tight to close, loosen the screw slightly and try again.
The T-tube should now be locked in place. If it continues to fall down, repeat the instructions in this guide.