How to replace the temperature controller of the AUX-208P1 electric kettle

简介

Looking to replace your damaged temperature controller? and don't know how? In this installation guide, we will teach you how to replace a new temperature controller. You can easily do it in just a few steps. This installation is based on the AUX-208P1 electric kettle, but the same concept is also applicable to the replacement of other electric kettle temperature controllers.

你所需要的

步骤 1 temperature controller

How to replace the temperature controller of the AUX-208P1 electric kettle, temperature controller: 步骤 1 中的图像 1，2

How to replace the temperature controller of the AUX-208P1 electric kettle, temperature controller: 步骤 1 中的图像 2，2

Clean all the dirt on the bottom of the electric kettle.

编辑

步骤 2

Use a Phillips screwdriver to unscrew the 3/4 in. Phillips Truss-Head Self-Drilling Screws at the bottom of the electric kettle counterclockwise.
Remove the base of the electric kettle.
Remove the LED indicator buckled on the base.
It is recommended to put the removed screws in the storage box to prevent loss.

编辑

步骤 3

Use long-nose pliers to clamp the connection between the electric kettle line and the old temperature controller to create a gap, and pull it off.
Don't use too much force to avoid damage to the line！

编辑

步骤 4

Use long-nose pliers to clamp the three nuts used to fix the old temperature controller, and twist them counterclockwise.

编辑

步骤 5

Remove the broken temperature controller.

编辑

步骤 6

Align the socket on the bottom of the new temperature controller with the protrusion on the bottom of the electric kettle to assemble.

编辑

步骤 7

Use long-nose pliers to tighten the nut clockwise to fix the temperature controller.

编辑

步骤 8

Fasten the electric kettle circuit to the interface of the new temperature controller.
Gently pull the interface to ensure a firm installation.

编辑

步骤 9

Re-buckle the removed LED indicator back to the base.
Buckle the base back to the bottom of the electric kettle.
Use a Phillips screwdriver to tighten the bottom 3/4 in. Phillips Truss-Head Self-Drilling Screws in a clockwise direction.