跳转到主内容

修复你的物品

维修的权力

商店

配件

没有特定配件。

    • In this tutorial you will find out how to fix not working touch ID in an Apple iPhone SE. If you need further assistance ask questions in the comments.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Alex Sander

于2017年02月28日注册

35,710 信誉积分

创作了203篇指南

No explanations at all? What’s the yellow film? Is that a heated surface or a heat gun off camera?

Mike Moran - 回复

The yellow stuff is presumably Kapton (heat-resistant) tape, and it looks like there’s a heat gun off to the right. I’ve never seen Kapton tape used like this—my guess is that the technician is attempting to blow hot air between the connector and the flex without melting the plastic on either. But if the hot air is correctly applied (which takes practice), the heat will go to the metal and solder and not the plastic, and the plastic won’t melt.

One other comment: unless the SE is different, it’s an understatement to say “you don’t need to use a new home button.” If you DO use a new home button, fingerprint sensing won’t work. It relies on hardware that is underneath the home button itself, and is paired to the motherboard (the CPU, I think). If you can splice flex cables, you can cut the home button away from its original flex and splice it on to a new flex, retaining fingerprint sensing (at least I’ve seen this done on YouTube). Otherwise I think you’re out of luck.

Bonnie Baxter - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 21

过去的30天: 116

总计 4,945