跳转到主内容

修复你的物品

维修的权力

商店

简介

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

工具

没有特定工具。

配件

  1. The filter is located in the canister of your vacuum.
    • The filter is located in the canister of your vacuum.

  2. 未插入研究

    Mac电池维修套装

    购买维修套装

    未插入研究

    Mac电池维修套装

    购买维修套装
  3. Open the canister filter compartment.  Push the clip upwards, and open the canister top away from you. Remove the yellow filter housing. Remove the yellow filter housing.
    • Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.

    • Remove the yellow filter housing.

  4. Remove the blue sponge-filter from the yellow filter housing.
    • Remove the blue sponge-filter from the yellow filter housing.

    • The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.

    • Clean the blue sponge-filter in cold water until the water runs clear.

结论

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

12等其他人完成本指南。

Donald Percivalle

于2012年10月03日注册

1,628 信誉积分

创作了4篇指南

团队

Cal Poly, Team 3-22, Amido Fall 2012 Cal Poly, Team 3-22, Amido Fall 2012 的会员

CPSU-AMIDO-F12S3G22

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 56

过去的30天: 270

总计 31,875