跳转到主内容

简介

Full video:

This process requires a rework station.

This is common problem with PSP E1000 caused by bad solder joints. This can be fixed with a bit of preheating.

配件

没有特定配件。

视频概述

  1. Let's start dismantling. Let's start dismantling. Let's start dismantling.
    • Let's start dismantling.

  2. start by removing the top part and then *gently* "fold" it down to the bottom start by removing the top part and then *gently* "fold" it down to the bottom start by removing the top part and then *gently* "fold" it down to the bottom
    • start by removing the top part and then *gently* "fold" it down to the bottom

  3. Disassembling the screen. Disassembling the screen. Disassembling the screen.
    • Disassembling the screen.

  4. Remove this screw. Remove this screw.
    • Remove this screw.

  5. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  6. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  7. Carefully disconnect the battery connector! Carefully disconnect the battery connector! Carefully disconnect the battery connector!
    • Carefully disconnect the battery connector!

  8. Remove the thermal tape. Remove the thermal tape. Remove the thermal tape.
    • Remove the thermal tape.

  9. You must resolder main processor with Rework Station (this is special equipment). You must resolder main processor with Rework Station (this is special equipment).
    • You must resolder main processor with Rework Station (this is special equipment).

  10. Cleaning and assembling. Cleaning and assembling. Cleaning and assembling.
    • Cleaning and assembling.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

ZFix

于2013年12月09日注册

167,876 信誉积分

创作了306篇指南

团队

Master Techs Master Techs 的会员

Community

290 名成员

创作了827篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 18

过去的30天: 85

总计 9,098