Skip to main content

介绍

All of the internal surfaces, especially the conductive metal pieces, need to be clean and well kept in order for the microphone to function at its best.

配件

没有特定配件。

  1. Grab the microphone base with one hand. With the other hand, grab just below the grille (the collar). Twist the collar clockwise to loosen it. Be careful to not pull on the collar or you may rip the wires from the faceplate. Be careful to not pull on the collar or you may rip the wires from the faceplate.
    • Grab the microphone base with one hand. With the other hand, grab just below the grille (the collar). Twist the collar clockwise to loosen it.

    • Be careful to not pull on the collar or you may rip the wires from the faceplate.

  2. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  3. Create a mild cleaning solution by mixing a few drops of dish soap and water in a cup.
    • Create a mild cleaning solution by mixing a few drops of dish soap and water in a cup.

    • Using a detailing brush and the solution, gently brush the pins and inside walls of the microphone.

  4. Make sure connector is completely dry before soldering, failure to do so may result in permanent damage.
    • Make sure connector is completely dry before soldering, failure to do so may result in permanent damage.

    • If you have previously soldered inside the microphone, you may use a soldering iron to melt off any excess solder that may be on the pins inside the connector. Do not attempt this if you have never soldered on the microphone before.

结论

After cleaning the faceplate and reassembling the microphone, it should work at its maximum potential.

nat coll

于2012年09月27日注册

423 Reputation

创作了14篇指南

Team

Cal Poly, Team 7-53, Forte Fall 2012 Cal Poly, Team 7-53, Forte Fall 2012 的会员

CPSU-FORTE-F12S7G53

5 名成员

创作了18篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 22

Past 30 Days: 79

All Time: 7,335