跳转到主内容

简介

If coffee is only coming out of one spout or the knob isn't having any effect on the volume of crema, a cleaning may be in order. This guide will show you how to disassemble, clean and reassemble the spout.

配件

没有特定配件。

  1. Remove the spout by pressing the button on top and sliding it towards you. Unscrew the two PH#1 screws on the back of the spout. The spout halves should now separate easily but light prying might be necessary.
    • Remove the spout by pressing the button on top and sliding it towards you.

    • Unscrew the two PH#1 screws on the back of the spout.

    • The spout halves should now separate easily but light prying might be necessary.

  2. Remove the spring of the pushbutton. Relaese the Button and remove the black insert off the cup filler. Push off the metal chrome part. Clean it with a small brush and rinse it under water.
    • Remove the spring of the pushbutton. Relaese the Button and remove the black insert off the cup filler.

    • Push off the metal chrome part.

    • Clean it with a small brush and rinse it under water.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Reinstall the metal part on the back cup filler part then insert the black piece. Hold up the black part a little for pushing in the Button.
    • Reinstall the metal part on the back cup filler part then insert the black piece.

    • Hold up the black part a little for pushing in the Button.

    • Then click it trogether and push in the spring.

  5. Click it together, put in the two screws and you are done. :) Click it together, put in the two screws and you are done. :)
    • Click it together, put in the two screws and you are done. :)

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Schwarzstein

于2013年07月15日注册

2,334 信誉积分

创作了14篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 6

过去的30天: 44

总计 2,377