Before starting, be sure to remove the battery from the camera. See Removing the Olympus Stylus 760 Battery Guide for details.

添加评论

Remove the screw located on the right side of the camera

  • Remove the screw located on the right side of the camera


添加评论

  • Remove the two screws from the left side of the camera

添加评论

  • Use a small prying device to delicately separate the front casing from the back.
New line.

    • When separating the 2 cases be cautious of the silver band and buttons that located in the middle of the camera. They will come loose.

添加评论

  • Remove the 2 screws on the right side of the camera.

  • Remove the 2 screwson the left side of the camera

  • CAUTION! Circuit ribbon is attached at the top left of the camera be careful when separating the front and back of the camera after removing the 4 screws.

添加评论

  • Carefully flip up the clip attaching the ribbon from the rear to the front and pull it out


添加评论

  • Carefully separate the front and back of the camera


添加评论

  • You should be left with 4 large pieces, the outer case, inner lens piece, outer silver band and back case containing the LCD display. 


添加评论

  • Using a size 0 Phillips head, remove 3 screws holding the ribbon cable that covers the back of the lens.

  • CAUTION: small loose pieces under the back lens cover

添加评论

  • Using tweezers remove tiny square lens cases. There are 4 small pieces.

  • The pieces are relatively small, so becareful that they do not fall inside of the lens.

添加评论

  • Remove the larger black rubber frame. Clean with condensed air.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Derek Guzman

于2012年02月10日注册

17 信誉积分

撰写一个指南

团队

James Madison, Team 3-3, Klein Spring 2012 James Madison, Team 3-3, Klein Spring 2012 的会员

JMU-KLEIN-S12S3G3

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 14

总计 1,151