修复你的物品 社区 商店

How to clean and maintain your Vape Mod

简介

This guide will teach you how to take apart your Vape Mod completely, analyze which parts need to be cleaned, and how to correctly clean them.

你所需要的

  1. How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: 步骤 1 中的图像 1，3 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: 步骤 1 中的图像 2，3 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: 步骤 1 中的图像 3，3

    • Although maintenance for your Vape Mod shouldn't be dangerous, it can be messy. It is recommended to do this on top of a paper towel.

    • Start by removing the top cap of your Vape Mod.

    编辑

  2. How to clean and maintain your Vape Mod: 步骤 2 中的图像 1，3 How to clean and maintain your Vape Mod: 步骤 2 中的图像 2，3 How to clean and maintain your Vape Mod: 步骤 2 中的图像 3，3

    • Unscrew RDA (rebuildable dripping atomizer) and take it off.

    编辑

  3. How to clean and maintain your Vape Mod: 步骤 3 中的图像 1，3 How to clean and maintain your Vape Mod: 步骤 3 中的图像 2，3 How to clean and maintain your Vape Mod: 步骤 3 中的图像 3，3

    • Many Vape Mods are different, you might have to take out your battery in a different way than shown.

    • At the bottom of the tube, unscrew the firing pin.

    • Take the battery out of the Vape Mod.

    编辑

  5. How to clean and maintain your Vape Mod: 步骤 4 中的图像 1，3 How to clean and maintain your Vape Mod: 步骤 4 中的图像 2，3 How to clean and maintain your Vape Mod: 步骤 4 中的图像 3，3

    • Inspect all of the parts that will need to be cleaned:

    • The firing pin

    • The RDA threading

    • The bottom of the inside of the tube

    编辑

  6. How to clean and maintain your Vape Mod: 步骤 5 中的图像 1，2 How to clean and maintain your Vape Mod: 步骤 5 中的图像 2，2

    • Clean the Firing pin by dipping a paper towel into hot water.

    • Carefully rotate the hot towel around the middle area, rubbing the grime away.

    编辑

  7. How to clean and maintain your Vape Mod: 步骤 6 中的图像 1，3 How to clean and maintain your Vape Mod: 步骤 6 中的图像 2，3 How to clean and maintain your Vape Mod: 步骤 6 中的图像 3，3

    • Get a new paper towel wet with the hot water.

    • Clean the RDA threading by rotating the wet paper towel back and forth across it.

    编辑

  8. How to clean and maintain your Vape Mod: 步骤 7 中的图像 1，3 How to clean and maintain your Vape Mod: 步骤 7 中的图像 2，3 How to clean and maintain your Vape Mod: 步骤 7 中的图像 3，3

    • Get a new paper towel wet with the hot water.

    • Twist it until it can easily fit inside of the tube.

    • Use your finger or another long tool to rotate the paper towel along the sides and the bottom of the tube.

    编辑

  9. How to clean and maintain your Vape Mod: 步骤 8 中的图像 1，3 How to clean and maintain your Vape Mod: 步骤 8 中的图像 2，3 How to clean and maintain your Vape Mod: 步骤 8 中的图像 3，3

    • Put your Vape Mod back together by doing steps 1 - 2 in reverse. (Leave the mouthpiece of the top cap off).

    • Careful, firing your Vape Mod produces heat and can make the device HOT!

    • Fire your Vape Mod. If the coils are heating up, it has been fixed!

    编辑
结论

If your Vape Mod is still not firing, consider getting a new build.

13等其他人完成本指南。

作者

与3其他贡献者

Jessie Smith

于09/29/15注册

677 声望

撰写一个指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team 14-3, Green Fall 2015 Cal Poly, Team 14-3, Green Fall 2015 的会员

CPSU-GREEN-F15S14G3

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 10

过去 30 天： 33

总计 10,616