简介

A guide on how to place a game into the cartridge reader, also for troubleshooting non-loading games.

  1. First obtain a cartridge. This is where games for the Game Boy are located.
    • First obtain a cartridge. This is where games for the Game Boy are located.

    添加评论

  2. Place cartridge into cartridge reader slot on the back of the Game Boy system.
    • Place cartridge into cartridge reader slot on the back of the Game Boy system.

    • The game graphic should be facing towards you when you place the cartridge into the reader slot.

    添加评论

    • Push down until the game "locks" into place, and the top of the game is a small amount beneath the top of the system.

    添加评论

    • If game does not load when the system is turned on, turn off system and remove cartridge.

    • Remove cartridge by placing thumb on the outside of the cartridge near the indentation and pushing up. Dislodging the cartridge from the cartridge reader.

    添加评论

    • Apply some air into the cartridge bottom and into the cartridge reader itself.

    • Reinsert cartridge and try again.

    • If problem still persists, an internal problem may be the culprit.

    添加评论

结论

To play another game, remove cartridge and place new one in cartridge reader.

9等其他人完成本指南。

Andrew Tramposch

于2010年06月24日注册

1,564 信誉积分

创作了6篇指南

团队

Cal Poly, Team 3-2, Johann Summer 2010 Cal Poly, Team 3-2, Johann Summer 2010 的会员

CPSU-JOHANN-R10S3G2

3 名成员

创作了11篇指南

Step one: blow into the game

Bry W - 回复

This guide is completely unhelpful with how to clean a GameBoy game.

It would be better to refer to these videos on how to clean old game cartridges:

- https://www.youtube.com/watch?v=K4SCpHgW...

- https://www.youtube.com/watch?v=4Ej2Y2ch...

Ervin - 回复

Nothing like a good ol’ blow job to get those old cartridges feeling new again.

Igor Kolosha - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 18

过去的30天: 57

总计 12,853