简介

Corrosion usually occurs in the battery compartment. It appears as a light blue coating on any metal components and prevents power from flowing in the camera.

    • In this guide we will be referring to 'left'and 'right' as though the camera's front (the part that says Nikon) facing you.

    • Use a quarter to twist open the one large screw on the bottom case. (No picture available.)

  1. Pull up on the tab to remove the batteries.
    • Pull up on the tab to remove the batteries.

    • Note: The batteries will probably fall out of their holder.

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  3. Your camera should look something like this.
    • Your camera should look something like this.

    • Clean the marked areas with a cotton swab soaked in CLR or vinegar.

  4. Corrosion appears as the bluish build-up you see in this picture. Scrub with a cotton swab until it has visibly decreased.
    • Corrosion appears as the bluish build-up you see in this picture. Scrub with a cotton swab until it has visibly decreased.

  5. All cleaned up!
    • All cleaned up!

结论

Reinsert the batteries by following the instructions backwards. If it's still not getting power, head over to our battery compartment replacement guide. Note: It may be tough to find replacement parts.

3等其他人完成本指南。

Zachary Phillips

于2011年04月08日注册

205 信誉积分

创作了5篇指南

团队

Cal Poly, Team 25-26, Garner Spring 2011 Cal Poly, Team 25-26, Garner Spring 2011 的会员

CPSU-GARNER-S11S25G26

3 名成员

创作了7篇指南

Wow it working thanks for assisting me. I used vinegar to clean my camera so it working now

lazarusmolai - 回复

浏览统计数据:

过去的24小时: 1

过去的7天: 13

过去的30天: 60

总计 11,922