简介

Corrosion usually occurs in the battery compartment. It appears as a light blue coating on any metal components and prevents power from flowing in the camera.

    • In this guide we will be referring to 'left'and 'right' as though the camera's front (the part that says Nikon) facing you.

    • Use a quarter to twist open the one large screw on the bottom case. (No picture available.)

    添加评论

  1. Pull up on the tab to remove the batteries.
    • Pull up on the tab to remove the batteries.

    • Note: The batteries will probably fall out of their holder.

    添加评论

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Your camera should look something like this.

    • Clean the marked areas with a cotton swab soaked in CLR or vinegar.

    添加评论

    • Corrosion appears as the bluish build-up you see in this picture. Scrub with a cotton swab until it has visibly decreased.

    添加评论

    • All cleaned up!

    添加评论

结论

Reinsert the batteries by following the instructions backwards. If it's still not getting power, head over to our battery compartment replacement guide. Note: It may be tough to find replacement parts.

3等其他人完成本指南。

Zachary Phillips

于2011年04月08日注册

205 信誉积分

创作了5篇指南

团队

Cal Poly, Team 25-26, Garner Spring 2011 Cal Poly, Team 25-26, Garner Spring 2011 的会员

CPSU-GARNER-S11S25G26

3 名成员

创作了7篇指南

Wow it working thanks for assisting me. I used vinegar to clean my camera so it working now

lazarusmolai - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 14

过去的30天: 62

总计 11,789