跳转到主内容

简介

A cracked or dirty cover shield can be the cause of many recording problems for the Sony ECM-MS907 microphone. This guide will go over a short examination of the cover shield.

配件

没有特定配件。

  1. Using the Phillips head (#00) screwdriver, remove the two screws at the bottom base of the diaphragm.
    • Using the Phillips head (#00) screwdriver, remove the two screws at the bottom base of the diaphragm.

  2. Separate the top outer cover from the bottom base of the microphone to reveal the cover shield.
    • Separate the top outer cover from the bottom base of the microphone to reveal the cover shield.

  3. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  4. Underneath the top outer cover is the partially welded cover shield, which protects the inner receiver of the microphone from dust. Examine the cover shield thoroughly for any dirt or cracks.
    • Underneath the top outer cover is the partially welded cover shield, which protects the inner receiver of the microphone from dust.

    • Examine the cover shield thoroughly for any dirt or cracks.

  5. Take a quick look at the top of the inner receiver for any excess dirt.
    • Take a quick look at the top of the inner receiver for any excess dirt.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Kefaya

于2014年01月23日注册

343 信誉积分

创作了3篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 9

总计 446