配件

无需配件。

  1. Open the tray by pressing the eject button
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    添加评论

  2. Press the eject button to insert the tray
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

    添加评论

    • Unscrew the 3 screws in the back.

    添加评论

    • Pull the outer case upward and then towards you.

    添加评论

    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

    添加评论

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

    添加评论

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

    添加评论

    • Remove the three screws holding in the DVD tray

    添加评论

    • Remove the power cord and first two ribbons by pulling them directly out of their sockets.

    添加评论

    • Gently lift the DVD tray off of the motherboard.

    添加评论

    • Use the tweezers to make sure all the buttons aren't stuck.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Mitchell Hart

于2011年01月21日注册

819 信誉积分

创作了5篇指南

团队

Cal Poly, Team 3-30, Regan Winter 2011 Cal Poly, Team 3-30, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G30

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 3

过去的30天: 6

总计 1,234