How to Restore the Magnetic Functionality of the Microsoft Surface Mobile Mouse

简介

The Microsoft Surface Mobile Mouse has a magnetic battery cover that conceals the battery compartment. I noticed that the magnetic strength of the cover deteriorates over time, especially after a fall from a table height. If the mouse takes a hard fall, the magnets inside the mouse get misaligned, and eventually causes the battery cover to not stay in place. The purpose of the repair is to show people how to restore the functionality of the magnetic battery cover.

你所需要的

步骤 1 How to Restore the Magnetic Functionality of the Microsoft Surface Mobile Mouse

How to Restore the Magnetic Functionality of the Microsoft Surface Mobile Mouse, How to Restore the Magnetic Functionality of the Microsoft Surface Mobile Mouse: 步骤 1 中的图像 1，3

Remove the AAA batteries from the battery compartment under the mouse.

编辑

步骤 2

How to Restore the Magnetic Functionality of the Microsoft Surface Mobile Mouse: 步骤 2 中的图像 3，3

在这个步骤中使用的工具：

Plastic Cards

$2.99

购买

Using a plastic card, create leverage under the top plate. Start at the mouse buttons and make your way to the back of the mouse.
Notice how the mouse buttons are raised after you create leverage under the top plate.

编辑

步骤 3

Using a plastic spudger, make your way to the back of the mouse. There are two hidden tabs that you can push outwards, and you can feel them once your spudger is in the center of the mouse. Apply pressure outwards on the hidden tabs in order to remove the top plate.
Notice how the top plate is separated from the mouse once successfully removed.

编辑

步骤 4

Remove the four 5mm screws from the back plate.
Remove the back plate from the mouse.

编辑

步骤 5

Locate the magnets and separate them from each other.
Notice how in this example, the magnets are stuck to the battery terminals. The magnets can be stuck to any metal surface inside the mouse.
Each of the magnets has a marking that shows what orientation the magnets should be in.

编辑

步骤 6

How to Restore the Magnetic Functionality of the Microsoft Surface Mobile Mouse: 步骤 6 中的图像 3，3

Place a magnet with the marked pole facing up into each of the 6 slots.
Use the battery cover to your advantage by placing it into the battery compartment. That way, the magnets stay in place when they are placed in their slots.

编辑

步骤 7

Use a hot glue gun to glue the magnets in place.
Be careful while using the hot glue gun! It may melt the plastic of the mouse if used for too long.
An alternative to hot glue is to use electrical tape in order to secure the magnets.