修复你的物品 社区 商店

How to Restore Contact Point Electrodes

简介

Reshaping the contact point electrodes which hold bObi's dustbin in place can resolve installation and bin latching difficulties.

你所需要的

  1. How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: 步骤 1 中的图像 1，3 How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: 步骤 1 中的图像 2，3 How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: 步骤 1 中的图像 3，3

    • Remove bObi's dustbin:

    • Push down on the button found on bObi's back to release the dustbin.

    编辑

  3. How to Restore Contact Point Electrodes: 步骤 2 中的图像 1，3 How to Restore Contact Point Electrodes: 步骤 2 中的图像 2，3 How to Restore Contact Point Electrodes: 步骤 2 中的图像 3，3

    • Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.

    • Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.

    编辑

  4. How to Restore Contact Point Electrodes: 步骤 3 中的图像 1，2 How to Restore Contact Point Electrodes: 步骤 3 中的图像 2，2

    • When the electrodes are fixed, slide the dustbin back into bObi. The HEPA filter side of the dustbin should face down.

    • Ensure it locks in place, and the contact point electrodes will line up correctly, so bObi can resume functioning.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Chelsea

于09/24/14注册

2,278 声望

创作了31篇指南

徽章: 11

+ 8更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 8

过去 30 天： 10

总计 300