加入维修社区 - 创建账户

简介

If you ever spilled soda all over your MacBook's keyboard and need to clean the keys, you should follow this guide. This does not apply to the newer Macbook pros and airs because they use different key mechanisms.

你所需要的

1. 步骤 1 How to Replace or Clean a Macbook Key
  Stick your finger underneath the key. Gently pry it up.
  
  You may need a spudger or flathead screwdriver to remove the key.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Now, carefully use your spudger or small flathead to, very gently, pry up the key mechanism, being careful not to damage it.
  
  You should now clean the key using a Q-tip, and taking the key and mechanism and put it in water and dry it out. It's not too hard to put the mechanism back together again. Or use a can of compressed air.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 3
  Once you have removed and cleaned the key (or have not cleaned) take a close look at the key. There is a big hook on the right side, and two smaller hooks on the top left and bottom left.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Now what you want to do, is hold the mechanism flat side up. Put the mechanism into the hook on the right side. A spudger or small flathead might help.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 5
  Now pop in the two pins on the bottom left and top left into their hooks using a small spudger or flathead.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
7. 步骤 6
  Now, take the key cap and pop it back on the computer.
  
  When you put the key back on, press it a few times to make sure the mechanism doesn't come out.
  
  Now test the keyboard, verifying that everything works.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024