跳转到主内容

修复你的物品

维修的权力

商店

简介

Rear light bulbs often go out on cars. The rear light bulbs are often hidden behind a rear tail light cover. This document provides guidance on how to remove the tail light cover and then provides guidance on how to remove and replace the associated rear tail light bulbs for 2011 to 2015 Ford Explorers.

  1. Lift and open the rear cargo door. Lift and open the rear cargo door.
    • Lift and open the rear cargo door.

  2. Locate the two plastic screw covers that are adjacent to the rear light covers.
    • Locate the two plastic screw covers that are adjacent to the rear light covers.

  3. Using a flathead screwdriver, pry out both plastic screw covers.
    • Using a flathead screwdriver, pry out both plastic screw covers.

  4. Once covers are removed, there will be an 8 mm hex head screw located beneath each cover.
    • Once covers are removed, there will be an 8 mm hex head screw located beneath each cover.

  5. Using an 8 mm Deep Socket Wrench, remove both of the 20 mm (length) hex-head screws.
    • Using an 8 mm Deep Socket Wrench, remove both of the 20 mm (length) hex-head screws.

  6. Gently pull the tail light cover from the car. You may have to gently play with the cover by moving it back and forth in order to pry it loose form the car.
    • Gently pull the tail light cover from the car.

    • You may have to gently play with the cover by moving it back and forth in order to pry it loose form the car.

  7. Once removed, the bulb sockets will be located on the inside portion of the tail light cover.
    • Once removed, the bulb sockets will be located on the inside portion of the tail light cover.

  8. Turn the bulb socket about one quarter turn in a counterclockwise direction.
    • Turn the bulb socket about one quarter turn in a counterclockwise direction.

    • After it is turned, gently pull and remove the bulb socket from the tail light cover.

  9. Gently remove the bulb from the bulb socket.
    • Gently remove the bulb from the bulb socket.

  10. Gently place the new bulb in the bulb socket.
    • Gently place the new bulb in the bulb socket.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Michael Lynch

于2015年09月29日注册

236 信誉积分

撰写一个指南

团队

Cal Poly, Team 14-4, Green Fall 2015 Cal Poly, Team 14-4, Green Fall 2015 的会员

CPSU-GREEN-F15S14G4

5 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 19

过去的30天: 108

总计 15,454