修复你的物品 社区 商店

How to Replace Scott Mountain Bike Handlebars

简介

Need to replace the handlebars on your mountain bike? This guide will show you how to replace it so the bike is good as new.

你所需要的

  1. How to Replace Scott Mountain Bike Handlebars, Scott Mountain Bike Handlebars: 步骤 1 中的图像 1，2 How to Replace Scott Mountain Bike Handlebars, Scott Mountain Bike Handlebars: 步骤 1 中的图像 2，2

    • Prop bike upright

    • Unscrew the hex bolts holding the front and rear shifter in place.

    • Use the H4 size hex wrench

    • Repeat for other side of handlebars.

    翻译

  2. How to Replace Scott Mountain Bike Handlebars: 步骤 2 中的图像 1，1

    • Slide the shifters toward the center of the handlebars so there is a gap between them and the grips.

    • Repeat for other side of handlebars.

    翻译

  3. How to Replace Scott Mountain Bike Handlebars: 步骤 3 中的图像 1，1

    • Use a flathead screwdriver to wedge a gap between the grip and the handlebars.

    • Twist grip around until it comes off of handlebar.

    • Repeat for other side of handlebars.

    翻译

  5. How to Replace Scott Mountain Bike Handlebars: 步骤 4 中的图像 1，1

    • Slide the shifters off of the end of the handlebars.

    • Let them hang on the bike.

    • Repeat for other side of handlebars.

    翻译

  6. How to Replace Scott Mountain Bike Handlebars: 步骤 5 中的图像 1，1

    • Unscrew the hex bolts holding the center bracket in place.

    • Use H3 hex wrench.

    • Place center bracket and hex screws off to the side. They will be needed in the next step.

    翻译

  7. How to Replace Scott Mountain Bike Handlebars: 步骤 6 中的图像 1，1

    • Attach new handlebars and screw the center bracket back in place.

    • Make sure that handlebars are centered.

    翻译

  8. How to Replace Scott Mountain Bike Handlebars: 步骤 7 中的图像 1，1

    • Slide the shifters back onto the handlebars so that the numbers are upright.

    • Do not screw them back in place yet.

    翻译

  9. How to Replace Scott Mountain Bike Handlebars: 步骤 8 中的图像 1，1

    • Slide the handlebar grips back onto the ends of the handlebars.

    • Slide the shifters back against the grips and screw them into place.

    翻译
结论

By following these steps, you will have your bike ready in no time.

作者

与4其他贡献者

Sean Slater

于02/24/15注册

139 声望

撰写一个指南

徽章: 3

团队

Cal Poly, Team 23-3, Green Winter 2015 Cal Poly, Team 23-3, Green Winter 2015 的会员

CPSU-GREEN-W15S23G3

6 名成员

创作了13篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 12

总计 1,716