跳转到主内容

简介

If the rotors will not turn on your RC Heli and it will not take off, you might have knocked one of the engine conversion gears out of place. Easily access the gear box of your helicopter and repair it with this easy fix.

配件

没有特定配件。

  1. Locate the problematic engine gear inside the helicopter frame.
    • Locate the problematic engine gear inside the helicopter frame.

    • It will seem out of place and will not connect with the rotor gear.

    • The white gear can be clearly seen out of place and not in contact with the upper rotor gear. This does not allow the blades to spin.

  2. Grab the screwdriver that will fit the screws on your specific model.
    • Grab the screwdriver that will fit the screws on your specific model.

    • The screws may not be the same sizes on your RC Heli.

    • Keep track of where the screws came from.

  3. Unscrew the decorative/protective shroud blocking your access to the inside of the helicopter. Unscrew the decorative/protective shroud blocking your access to the inside of the helicopter.
    • Unscrew the decorative/protective shroud blocking your access to the inside of the helicopter.

  4. Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物

    Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物
  5. If it is possible to reset the gear without unscrewing further, attempt to push the gear back up into place on the motor shaft with a screwdriver or your finger.
    • If it is possible to reset the gear without unscrewing further, attempt to push the gear back up into place on the motor shaft with a screwdriver or your finger.

    • If this works you have fixed the gear and can skip to step 7.

    • If the gear is inaccessible you will have to open the frame, go to step 5.

  6. Unscrew one side of the frame and set it aside, allowing access to the gear. Make sure all the screws and frame pieces are kept in a secure location.
    • Unscrew one side of the frame and set it aside, allowing access to the gear.

    • Make sure all the screws and frame pieces are kept in a secure location.

  7. Place the screwdriver's tip underneath the clear motor gear. Firmly push the gear back up into place so that it correctly connects with the main rotor gear.
    • Place the screwdriver's tip underneath the clear motor gear.

    • Firmly push the gear back up into place so that it correctly connects with the main rotor gear.

    • See the last picture for a proper gear connecion visual.

  8. Return all the pieces to their original  place inside the frame. Screw the frame tightly back into place. Screw the frame tightly back into place.
    • Return all the pieces to their original place inside the frame.

    • Screw the frame tightly back into place.

  9. Test the helicopter for functionality. If it works then the helicopter is fixed and you can screw the shroud back into place.
    • Test the helicopter for functionality.

    • If it works then the helicopter is fixed and you can screw the shroud back into place.

结论

To reassemble, after testing for functionality, make sure all inner parts are back in their original location. Screw the frame and shroud tightly back in place.

2等其他人完成本指南。

Neil Wolfe

于2015年04月09日注册

136 信誉积分

撰写一个指南

团队

Cal Poly, Team 30-6, Green Spring 2015 Cal Poly, Team 30-6, Green Spring 2015 的会员

CPSU-GREEN-S15S30G6

2 名成员

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 21

过去的30天: 86

总计 3,240