How to Remove the Back Plate of a TI-NSpire

简介

If your TI-NSpire calculator is experiencing operational issues, it may be necessary to remove the back plate to access the inner circuitry. This repair guide will demonstrate how to safely and efficiently remove the back plate without causing any damage to the wires or connectors.

Once removed, you will have access to the battery, display, and buttons, which is essential for other troubleshooting guides that require the replacement or repair of these components. You can find the model number of your TI-Nspire on the front logo or on the back of the device. Model Number: TI-Nspire CX.

你所需要的

步骤 1 How to Remove the Back Plate of a TI-NSpire

How to Remove the Back Plate of a TI-NSpire, How to Remove the Back Plate of a TI-NSpire: 步骤 1 中的图像 1，1

Place the calculator screen facing down, with the back plate facing up.

编辑

步骤 2

Remove the six 7.3 mm screws from the back of the calculator using a Phillips #000 screwdriver.

编辑

步骤 3

How to Remove the Back Plate of a TI-NSpire: 步骤 3 中的图像 3，3

Slide the latch to the right to release the keypad.
Pull the keypad down at the same time.

编辑

步骤 4

Remove the screw near the bottom of the calculator on the front side.
The screw is behind where the keyboard normally sits.

编辑

步骤 5

How to Remove the Back Plate of a TI-NSpire: 步骤 5 中的图像 3，3

Turn the calculator over so the back plate faces up.
Use the iFixit Opening Tool to carefully pry the back plate out at the bottom right corner.
The prying order is arbitrary. The importance is to pry across the length of the calculator.
Repeat the prying step on the middle right side, moving along the perimeter of the calculator.
Repeat the prying step on the top right corner.